Replacing The Aquaclean Filter - Saeco Incanto HD8917 Mode D'emploi

AQUA CLEAN
FILTER
0 / 8
ON
OFF
0 / 8
AQUA CLEAN
FILTER
1 / 8
AQUA CLEAN
FILTER
1 / 8
0%
AQUA CLEAN
FILTER
NEW?
4219_460_3631_2_Lux_Booklet_A5_v2.indd 15
- The display shows the number of AquaClean filters that have
been installed previously from 0 to 8 filters.
3 Select ON on the display, press the OK button to confirm.
4 The display automatically updates the number of filters used.
- Then the 'machine ready' screen appears with the
AquaClean 100% icon to indicate that the filter has been
installed.
5 Dispense 2 cups of hot water (0.5 l) to complete the activation.
Discard this water.

Replacing the AquaClean filter

Note: Replace the AquaClean filter as soon as the capacity has
dropped to 0% and the filter icon flashes quickly. Replace the
AquaClean filter at least every 3 months, even if the machine has
not yet indicated that replacement is required.
Tip: We advise you to buy a new filter when the capacity has
dropped to 10% and the filter icon starts flashing slowly.
This ensures that you can replace the filter when the capacity
has dropped to 0%.
1 Take out the AquaClean filter and replace it by a new AquaClean
filter (also see the separate quick start guide).
2 Press the MENU button, scroll to AQUACLEAN FILTER and press
the OK button to confirm.
- The display asks if you want to activate a new filter.
3 Press the OK button to confirm.
English
15
21/07/17 14:30