Meister MWS2200-230 Traduction Du Manuel D'utilisation Original page 62

•­ Ensure­that­grinding­tools­are­mount-
ed according to the manufacturer's
directions.
•­ Always­use­spacers­or­shims­if­these­
are supplied with the grinding tool or
if­they­are­specified.
•­ Ensure­that­the­grinding­tool­is­cor-
rectly mounted and secured before
starting work. Allow the machine
to run for 30 sec. in a safe position
beforehand. Stop work immediately if
unusual­vibrations­occur­or­other­defi-
ciencies are noticed. In such a case,
check the machine carefully to deter-
mine the cause.
•­ Never­use­separate­reducing­sleeves­
or­adapters­to­fit­grinding­disks­with­
large holes.
•­ Ensure­that­flying­sparks­do­not
cause danger, e.g. to other persons
or­by­igniting­inflammable­substances.
•­ During­dusty­work,­ensure­that­the­
ventilation slits are kept free. If dust
has­to­be­removed,­first­disconnect­
the power tool from the power sup-
ply. Use non-metallic objects and
avoid damaging interior parts of the
machine.
•­ The­disk­continues­to­run­after­the­
machine­is­switched­off.­Do­not­lay­
the machine aside until the disk has
come to rest.
•­ Always­protect­eyes­and­ears.
62
5455260-Winkelschleifer_man.indd 62 5455260-Winkelschleifer_man.indd 62
•­ Other­personal­safety­equipment,
e.g. dust mask, gloves, helmet and
clothing (e.g. apron) should also be
worn.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
Important! Observe operating
instructions!
Wear goggles.
Wear a dust-protection mask
Use ear defenders
„Tested­Safety"­voluntary­
quality mark
Disk size 230 mm
230
Housing is double insulated
CE Mark (conformity to Euro-
pean safety standards)
Joining thread M14
BJ Year of construction
SN: Serial number
24.07.20 11:03 24.07.20 11:03