Meister MWS2200-230 Traduction Du Manuel D'utilisation Original page 55

GB
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc­
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating inst­
ructions must also be included!
Contents
1 - General safety
instructions
2 - Safety instructions
relating specifically to
the equipment
3 - Components
4 - Correct use
5 - Technical information
1 - General safety
instructions for handling
power tools
I. General safety information
WARNING! Read all safety warn­
ings and all instructions. Failure
to follow the warnings and instructions
may­result­in­electric­shock,­fire­and/or­
serious injury.
Save all warnings and instructions for
future reference.
The­term­"power­tool"­in­the­warnings­
refers to your mains operated (corded)
power tool or battery-operated (cord-
less) power tool.
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite acci-
dents.
b Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
5455260-Winkelschleifer_man.indd 55 5455260-Winkelschleifer_man.indd 55
Page
6 - Scope of delivery
55 7 - Installation and setting
8 - Operation
9 - Mode of operation
61 10 - Maintenance and
63 environmental
63 protection
64 11 - Service instructions
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c Keep children and bystanders away
while operating a power tool. Dis-
tractions can cause you to lose control.
2 Electrical Safety
a Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified­plugs­and­matching­outlets­
will reduce risk of electric shock.
b Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
c Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Page
65
65
67
67
68
69
55
24.07.20 11:03 24.07.20 11:03