Switching The Nightlight On And Off; Activating The Reminder Function - NUK Eco Control Video Display 550VD Mode D'emploi

The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.
6.5 Switching the nightlight
on and off
The nightlight function provides a soft dim
light in baby's room.
Note: Alternatively, you can switch the
nightlight on and off from the baby unit itself
(see "5.5 Nightlight" on page 54).
1. Press the button 26.
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the 24 or
select the Nightlight menu.
The selected symbol will be shown in red.
3. Press the
submenu.
If a setting has already been made, either
on the baby unit on the parent unit, the
active setting will be shown in green. In
addition, all the activated functions are
shown in the status bar at the top of the
screen.
4. Use the 25 or
star in front of the required setting.
60, 40, 20: nightlight is on, but will
automatically switch off after the set
number of minutes.
ON: nightlight is permanently on.
OFF: nightlight is off.
5. Press the button 26 to confirm your
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
27 button to
button 26 to view the
28 button to move the
If activated, the corresponding symbol
will be shown in the status bar (see
"3.3 Overview of status bar indicators"
on page 47).
Note: After 15 seconds without any input
from you, the menu will be closed with the
settings unchanged and the parent unit will
return directly to monitoring mode.
6. To switch the nightlight off:
– follow steps 1 to 5 described above,
select the OFF setting, and then press
the button 26
– alternatively, press the Nightlight on/
off button 13 on the baby unit.
Attention! Please note that you could wake
your baby if you activate the night light while
your baby is asleep and Eco-Mode is active.
Eco-mode is active if:
– LED 20 is flashing
– the corresponding symbol is shown in
the status bar (see "3.3 Overview of
status bar indicators" on page 47)
– video transmission is deactivated
If you switch the nightlight on regardless,
Eco-mode will automatically be deactivated.
6.6 Activating the reminder
function
The baby monitor has a timer with an alarm
function, which can be set to remind you of
baby's next feed time or wake-up time.
1. Press the
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the
select the Feed time reminder
menu.
The selected symbol will be shown in red.
3. Press the
submenu.
57
button 26.
24 or 27 button to
button 26 to view the