Changing the oven light
The oven light is a standard 40-watt appliance halogen bulb. It comes on when the
oven door is open. When the oven door is closed, touch LIGHT to turn the light on
or off. It will not work during a self-cleaning or GreenClean™ cycle.
CAUTION
Before changing the oven light, make sure to wear gloves to protect your hands.
DOC30P977DS_DA_DG68-01316A-00_EN.indd 73
1.
To change the bulb, you must tilt
the broil heater down. To do this,
turn the circular nut on the support
counterclockwise while holding the
broil heater. The broil heater should
loosen and tilt down.
CAUTION
The broil heater is not a removable part. Do
not force the broil heater down. Do not let it
drop down.
2.
While holding the glass cover with one
hand, insert a flat-sharp tool such as a
table knife between the glass and the
frame to remove the glass cover.
3.
Turn the bulb cap counterclockwise to
remove.
NOTE
If necessary, remove the metal rings and
clean the bulb cap.
4.
Replace the bulb.
5.
Place the bulb cap and glass cover back
into their position.
6.
Return the broil heater back by
following step 1 in reverse order.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.
English 73
2020-07-07 오후 4:53:37