Use And Operation; Before First Use - Klarstein CHATEAUBRIAND NUOVO Mode D'emploi

EN
12

USE AND OPERATION

Before first use

• Before plugging in your new Raclette grill, check to see that the electric circuit is
not overloaded with other appliances. This unit should always be operated on a
separate 220-240 volt, AC outlet which is able to supply min.16A
• Be certain that your unit is resting level on the countertop. Avoid using pans that are
unstable and easily tipped. Place pan under heating element.
• Turn the switch on 1 position. The pilot light will glow indicating the heating element
is energized and heating will begin immediately
• The metal surfaces will become hot. Do not touch while is use. When cooking is
finished, turn the thermostat back to « O » position.
• The surface is hot when using or before cooled. Never touch the appliance before
it's cooled to avoid scald.
• If the hotplate is not to be in use for a long period of time, it is recommended to
unplug unit from the outlet. This helps to prevent accidental burns.
Operation
• Plug in the appliance.
• Put the switch at the position "MIN", the indicator comes on. Pre-heating time is
5 – 8 min for the grill,
• Because the surface is very hot, it is recommended to put the appliance on anti-
flame and heat-proof cushion. It is also recommended that the minimal distance
between wall or environmentally components is not shorter than 15cm.
• It is possible that slight smoke smell comes out when first using.
• When first use, drop some oil on the surface of plate then wipe it with dry cloth.
• In order not to destroy the plating of Teflon, when turning or moving food, make
sure a wooden shovel is used.
• Don't put other mini pan which does not match the whole set on the appliance.