Connecting And Disconnecting The Colder Connectors; Opening And Closing Hose Pinch Clamps - Stryker Medical T/Pump TP700 Manuel D'utilisation

English
Connecting and disconnecting the Clik-Tite connectors (Continued)
EN
3. To disconnect, reverse the procedure.

Connecting and disconnecting the Colder Connectors

TP700C has Colder style connectors
To connect Colder connectors from the hose to the pad:
1. Insert the male coupling into the female coupling
have joined the connectors.
2. To disconnect, press down on the thumb tab (A) of the female coupling. The couplings will partially disconnect.
3. Pull the mail coupling out to disconnect

Opening and closing hose pinch clamps

To open or close the hose pinch clamps:
1. Open the clamp by pushing on the serrated end
2. Close the clamp by pressing the clamp together
1-10
Figure 1-7: Connecting couplings
(Figure 1-8 on page
Figure 1-8: Disconnecting couplings
Figure 1-9: Open the clamp
Operation
(Figure 1-7 on page 1-10). When you hear an audible click, you
1-10).
(Figure 1-9 on page 1-10).
Figure 1-10: Close the clamp
(Figure 1-10 on page 1-10).
101515 REV E www.stryker.com