Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting single or multiple pads
The Mul-T-Pad products provide the interface for delivering temperature therapy. The unique button design allows water
to flow and provides trouble-free operation when the pad is folded to form a customized fit. You apply the pads to the
part of the body that require therapy. The circulating water maintains the pad at the setpoint temperature.
The pad is connected to the pump with Clik-Tite or Colder connectors.
You can interconnect the Mul-T-Pad
provide therapy to more than one body part at a time
Figure 1-1: Localized temperature system with single
pad
Connecting and disconnecting the Clik-Tite connectors
TP700 has Clik-Tite style connectors.
To connect the Clik-Tite connectors from the hose to the pad:
1.
Insert the male fittings into the female fittings with a twisting motion
1-9).
Figure 1-3: Connecting fittings
2.
After you insert fittings
(Figure 1-5 on page
Figure 1-5: Insert fittings
www.stryker.com
Operation
(Figure 1-1 on page 1-9
) by using the Clik-Tite or Colder style connectors to
(Figure 1-2 on page
Figure 1-2: Localized temperature therapy system with
1-9), snap the lock ring into place
101515 REV E
1-9).
multiple pads
(Figure 1-3 on page 1-9
and
Figure 1-4 on page
Figure 1-4: Twist fittings
(Figure 1-6 on page
Figure 1-6: Lock ring
English
EN
1-9).
1-9
Publicité
Chapitres
Table des Matières
