CLR−...
Pneumatic components
Remove the adhesive labels on the compressed air connections.
S
Check to see if accessories are required as shown in the following table:
S
Type
HGL−...
GRLA−... /
GRLZ−...
VZS−...
Fig. 17
Make sure the tubing is as short as
S
possible.
Short tubing optimizes the pressurization
time.
Screw the one−way flow control valves of
S
type GRLZ−... or GRLA−... into the com
pressed air connections.
Connect the tubing of the CLR−... to the
S
compressed air connections.
CLR−...
Connector thread
Tightening torque
Fig. 19
Electric components
Avoid interference caused by magnetic or ferritic parts in the vicinity of the
S
proximity switches. This will guarantee that the proximity switches function
correctly and faultlessly.
Push the proximity switches into groove 4.
S
Festo CLR−... 0312NH English
Title
Non−return valves with
control
One−way flow control valves
Compensation reservoir
12
16
M5
1.5 Nm
Function
If there is a drop in pressure, the pressure
in the piston chamber will be retained.
The piston speed can be modified.
Fluctuations in pressure will be reduced
in the downstream−switched compressed
air string.
Fig. 18
20
25
32
G1/8
6.0 Nm
40
50
63
27