Ravelli Touch Radio HYDRO Manuel page 150

Use and maintenance manual Touch Radio Hydro
Phase Description
OFF The stove is off
When the switch-on request from ECO-STOP mode coincides with an automatic
WAIT FOR PELLETS
switch-off condition (from the TIMER), the stove turns on ensuring total cleaning of
OUT OF
the brazier before switching to FINAL CLEANING.
CONDITION: when the pellet setting (set pellets +5) is near the continuous load
AUGER OVERFLOW condition.
SOLUTION: Set the value back to 0.
GENERIC ALARM The stove is in alarm state; refer to the troubleshooting chapter.
The stove has detected an anomaly; refer to the troubleshooting chapter.
ANOMALY (general)
By pressing the confirmation key, the problem is described.
AUTOMATIC CLEAN-
For models with automatic cleaning system it indicates the operating state of the
ING SYSTEM ACTIVE same.
Forced shutdown state when the boiler water reaches 85°C. The stove restarts au-
STAND BY
tomatically if the restart conditions are met.
Rev.0 18/05/2021
EN
Pag.41