Description Of The Handheld Set - Ravelli Touch Radio HYDRO Manuel

Rev.0 18/05/2021
EN
Pag.30

Description of the handheld set

The PDA looks like the following picture:
The information below will familiarize you with the product and give you the best performance.
1
2
3
��
The display backlight turns off after a few moments when the handheld is not used. It is activated again with the first press
of any key.
��
After a further time of inactivity, the display goes into "SLEEP" mode and the handheld screen is deactivated in order to
reduce battery consumption, while maintaining radio communication with the stove active. Pressing the ON / OFF key
reactivates the display.
��
There is an ambient probe integrated in the handheld. Keep the PDA in a suitable place to measure the real temperature of
the room to be heated (not too close to the stove or a source of heat or cold).
How to insert the batteries in the handheld set
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries (mini
pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover as shown in
figure B. The handheld, after a first short screen showing the Ravelli logo, will list the languages available in the menu.
What happens if the batteries are empty
If the battery is discharged, within the "drop" is shown a symbol that indicates that the battery is empty, while maintaining active the
features of your device.
As soon as the level of the battery prevents the radio communication the handheld set displays on full screen the picture of empty
battery and all device functions are locked until the batteries are replaced.
��
If not in use for a long time, we recommend removing the batteries from the remote control.
Use and maintenance manual Touch Radio Hydro
4
5
6
Figura A
1
Increase button "UP" (selection key)
2
Decrease key "DOWN" (selection key)
3
ON/OFF or reset from "Sleep" mode key.
4 Display
5
Key for accessing the MENU and back
6
Confirmation key
Figura B