3M DBI SALA FLEXIGUARD M100 Mode D'emploi page 9

5.3 STORAGE: If applicable, store the H-Base and associated Fall Protection equipment in a cool, dry, clean environment out
of direct sunlight. Avoid areas where chemical vapors may exist. Thoroughly inspect components after extended storage.
6.0 LABELS and MARKINGS
6.1 LABELS: Figure 10 illustrates labels on the H-Base. Labels must be replaced if they are not fully legible. Information
provided on each label is as follows:
Warning Label:
A
1) CE Certification
2) Read Instructions
3) Company Logo
4) CE Certification and OSHA Certification
5) Safe Working Radius
6) Maximum Weights of H-Base = less than or equal to symbol 1,335 lb. (605 kg)
7) Maximum Weight of M100 Jib Boom = less than or equal to symbol 805 lb. (365 kg)
8) Maximum Weight of H-Base + M100 Jib Boom = less than or equal to symbol 2,140 lb. (970 kg)
9) Maximum Supporting Surface Slope = +/- 1°
Identification Label:
B
1) Manufactured (Year/Month)
2) Model Number
3) Serial Number
4) Company Logo
9