Use
Select the working mode
You may need to select one of the following two ways to set the appliance:
1)
Auto Set mode
Under Auto Set mode, the appliance can automatically adjust the temperature setting ac- cording to
the ambient temperature and temperature change in the appliance. If you do not have any special
requirements, we recommend that you use Auto Set mode (refer to Auto Set mode later on).
2)
Manual adjusting mode:
If you want to manually adjust the temperature of the appliance in order to store a particular food,
you can set the temperature via a temperature adjusting button (refer to ADJUST THE
TEMPERATURE).
1
2
3
Frid
ge
Door opening alarm
When the refrigerator door is opened for more than 1 minute, the
door opening alarm will sound. The alarm can be silenced by either
closing the door or touching the control panel. If the door is left open
for more than 7 minutes, the light inside the compartment and
control panel illumination will automatically switch off.
Adjust the temperature
The indoor temperatures are influenced by the following factors:
Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance
Adjust the temperature for fridge
1.
Unlock the panel by pressing button "F" if it is locked.
2.
Press button „A" (Fridge) for select the fridge compartment.
An alarm sounds. The actual temperature in the refrigerator
compartment is displayed.
3. Press button "A" to set the fridge temperature. A signal
will sound at each key press. The temperature increases in
sequences of 1°C from a minimum of 1°C (OF) to a
maximum of 9°C, switching to 1°C again when pressing
further. The optimum temperature in the refrigerator is 5°C.
Colder temperatures mean unnecessary energy consumption.
If no key is operated in 5 sec., the setting confirms automatically.
48