3 USING THE APPLIANCE
3.1 Information on the Frost Free
Technology
The Frost Free refrigerators have a
different operating system
to static refrigerators.
In normal (static) fridges,
the humidity entering the
fridge due to opening the
door, and the humidity
inherent in the food,
causes frost build-up in
the freezer compartment.
To defrost the frost
and ice in the freezer
compartment, you are
required to periodically
switch off the fridge,
place the frozen food
in a separate cooled
container, then remove
the ice gathered in the
freezer compartment.
The situation is
completely different in No-
frost fridges. A built-in fan
blows dry and cold air evenly throughout
the cooler and freezer compartments. The
cold air disperses uniformly between the
shelves, ensuring all your food is cooled
equally, thus preventing humidity and frost
build-up.
Therefore, your No-frost fridge allows ease
of use, in addition to its huge capacity and
stylish appearance.
3.2 Display and Control Panel
1
2
Using the Control Panel
1. Temperature set button
2. Super cooling symbol (Super cooling
LED)
3. Alarm symbol (Alarm LED)
4. Adjusted temperature indicator
3.3 Operating your Fridge Freezer
Lighting (If available)
When the product is plugged in for the
first time, the interior lights may turn on 1
minute late due to opening tests.
3.3.1 Temperature Set Button
This button allows setting temperature of
the fridge. In order to set values for fridge
partition, press this button. Use this button
also to activate super cooling mode.
3.3.2 Temperature Settings
• It ensures that the temperature
settings in the cooling and freezing
compartments of your refrigerator are
performed automatically. It may be set
to any value ranging from MIN to MAX
and super cooling mode. As you press
temperature set button from MIN to MAX,
the temperature decreases. To save
energy in winter months, operate your
refrigerator in a lower position.
• Initial temperature setting for refrigerator
is at the middle point.
• Every time you press temperature set
button, setting temperature will decrease
until super cooling symbol and if you
keep on pressing the set temperature will
be min set temperature again.
EN - 12
3
4