Installation
3. The stability can be checked by alternately bumping on
the diagonals. The slightly swaying should be the same in
both directions. Otherwise the frame can warp;
possible leaking door seals are the result. A low
tendency to the rear facilitates the closing of the door.
Fine tuning of the doors
If the doors are not in one level, this mismatch can be
remedied by following:
A) Using adjustable foot
Rotate the adjustable foot according to the direction of
arrow to turn up or down the foot.
B) Using spacers
Open the upper door and lift it.
Carefully clip the spacer (enclosed in the accessory bag)
in the white plastic ring of the middle hinge by hand
or using tools like pliers. Do not scratch or bruise the
door.
In the future use of refrigerator, doors uneven phenomenon may occur to the weight of
stored food. Then please adjust according to the above methods.
64
3.