Sensor Keys; Standby Mode - ROSIERES RN4D 8194 GN Manuel D'utilisation

Use
USE

Sensor keys

The buttons on the control panel are sensor keys, which already respond when lightly touched
with the finger.
Switch on /off the appliance
The appliance is in operation as soon as it is connected to the power supply.
When the appliance is powered on for the first time, the actual refrigerator and freezer
temperatures are displayed. The display will flash. If the doors are closed it will switch off after
30 seconds.
Maybe the panel lock is active.
The appliance is preset to the recommended temperature of 5°C (refrigerator) and
- 18°C (freezer). Under normal ambient condition you need not to set a temperature.
When the appliance is switched on after disconnection from the main power supply, it may
take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance, pull the power cord out of
the power socket.
Lock/unlock panel
The control panel is automatically blocked against
activation if the doors are closed and 30 seconds no
button is pressed. For any settings the control panel
must be unlocked.
Touch button "F" for 3 seconds to block all panel elements against activation. The buzzer
alarms and the related indicator "f" is now displayed; the lightening of the panel is
switched off. The icon flashes if a button will be pressed, when the panel lock is
activated. The change is not running.
For unlocking press again the button.
Standby-mode
The display screen turns off automatically 30 seconds after pressing a key. The display will be
automatically locked. It lights up automatically when pressing any key or opening any door
(Alarm does not light up the display screen).
47