Indication For Use
The Infinity XR2 Base Unit is intended to be used to support a patient during diagnostic
examination and/or surgical procedures where a rigid support between surgical table and
headrest, or skull clamp is necessary, positional freedom is required and where X-ray imaging
modalities will be used.
Failure to read and follow the instructions furnished in this product insert may
result in serious patient injury.
Do not steam sterilize; components may be damaged by high heat leading to
device damage and reduced performance.
The headrest or skull clamp must be securely fastened to the base unit. Failure
to fully tighten all adjustment portions of this or any similar device may result
in serious patient injury.
The user must make sure that any threaded connections are secure and
starbursts have meshed (where applicable) after adjustments are complete.
Failure to do so may result in serious patient injury.
Always make sure the base unit is properly secured to the operating table.
The base unit must not be used if the device appears to be damaged or
functioning incorrectly.
Over-tightening the mechanisms adjustment screws may result in damage to
the unit.
Over extending or overloading the base unit may result in unintended
movement, shortened product life and/or damage to the unit.
Do not alter the construction of this device as it may result in serious patient
injury.
WARNING!
CAUTION!
Page 2