Setting The Time; Setting The Date; Setting The Language - SciCan STATIM 2000 G4 Manuel De L'utilisateur

3 Setting up your STATIM

3.7 Setting the Time

1.
2. Scroll to
Time
3. From the TIME screen, use the keypad to set the time. Press
Setup menu.
4. To change your unit to display 12-hour time format (24-hour time format is the default setting), go
to the Setup menu and use
save and return to the Setup menu.
5. To activate daylight savings time (DST), which is recommended if you have connected your unit to a
network, go to the Set up menu and use
toggle DST ON or OFF and press

3.8 Setting the Date

1.
Date
2. Scroll to
3. From the DATE screen, use the keypad to set the date. Press
Setup menu.
4. To change your format in which the date appears, return to the Setup menu and use
to DATE FORMAT. Select it, and follow the prompts to have the date displayed in the desired format.
Press to save and return to the Setup menu.

3.9 Setting the Language

The messages displayed by your STATIM can be presented in a number of different languages.
To change the current language, follow these steps:
1.
Language
2. Scroll to
3. From the Language screen, press
have found the desired language, press
and select.
to scroll to TIME 12/24, select it and toggle to 12. Press
to save and return to the Setup menu.
and select.
and select.
to scroll through the list of languages. When you
to save your selection and return to the Setup menu.
Page 14
to save and
EN
to scroll to DST ON/OFF and select. Use
to save and
EN
to return to the
to
to
to return to the
to scroll