Setting The Time; Setting The Date; Setting The Language - SciCan AUTOCLAVE Statim 2000 G4 Manuel De L'utilisateur

3 Setting up your STATIM
3.6 Setting the Time
1.
2. Scroll to and select.
3.
From the TIME screen, use the keypad to set the time. Press to save and
to return to the Setup menu.
4.
To change your unit to display 12-hour time format (24-hour time format is the default
setting), go to the Setup menu and use to scroll to TIME 12/24, select it and
toggle to 12. Press to save and return to the Setup menu.
5.
To activate daylight savings time (DST), which is recommended if you have connected
your unit to a network, go to the Set up menu and use to scroll to DST ON/OFF
and select. Use to toggle DST ON or OFF and press the to save and return
to the Setup menu.
3.7 Setting the Date
1.
2. Scroll to and select.
3.
From the DATE screen, use the keypad to set the date. Press to save and
to return to the Setup menu.
4.
To change the format in which the date appears, return to the Setup menu and use
the date displayed in the desired format. Press to save and return to
the Setup menu.
3.8 Setting the Language
The messages displayed by your STATIM can be presented in a number of different
languages. To change the current language, follow these steps:
1.
2. Scroll to and select.
3.
From the LANGUAGE screen, press to scroll through the list of languages.
When you have found the desired language, press to save your selection and return
to the Setup menu.
Time
Date
to scroll to DATE FORMAT. Select it, and follow the prompts to have
Language
Page 15
EN
EN