Printing Cycle Information; Connecting To A Printer; Adjusting Your Printer Settings; External Printers And Specifications - SciCan STATIM 2000 G4 Manuel De L'utilisateur

8 Printing Cycle Information

The STATIM G4 is equipped with an RS232 serial port to allow you to connect it to an external printer.
(For a list of recommended printers, see the table below.)

8.1 Connecting to a Printer

To connect the printer, follow these steps:
1. Connect the external printer to the STATIM G4's RS232 port using the serial printer cable supplied
with your printer.
2. Power on the printer.
3. On the STATIM G4, select
4. Scroll to Printer Type
5. Use to toggle to the Serial Printer option and select. Press
the Setup menu.

8.2 Adjusting your Printer Settings

The STATIM G4 allows for several printer adjustments. You can access these settings from the user setup
menu (see instructions above). Use the table below or your printer's operator manual to make the correct
adjustments to your printer's

8.3 External Printers and Specifications

Suggested External
Printers by SciCan
Epson
TM-U220D (C31C515603)
Citizen
IDP-3110-40 RF 120B
Star Micro
SP212FD42-120
Star Micro
SP216FD41-120
Star Micro
SP512MD42-R
and select.
,
Baud Rate
End of Line CR/LF
CR/LF
CR
CR
CR/LF
CR/LF
Page 40
and
End of Line CR/LF
Serial Port Bitrate
9600
9600
9600
9600
9600
to save and move back to
.
Printer User Char
Printer user ° char
248 [0xF8]
N / A
210 [0xd2]
210 [0xd2]
210 [0xd2]