ST Quadrat LUX-top ASP Série Manuel D'utilisation page 22

Use / system description:
®
The LUX-top ASP
CEN/TS16415:2013, which is used to anchor personal fall protection equipment for
working in areas in which there is a risk of falling.
It can be installed on diverse load-bearing substrates in accordance with the relevant
installation instructions.
®
The LUX-top ASP is intended for loading in all directions.
If used in accordance with the regulations, the maximum force input into the structure by
the anchor device in case of a fall is 12 kN.
®
The LUX-top ASP
body harnesses and energy absorbers (including 1 person for first aid/rescue).
An anchor point already deformed by a fall can still be used for the rescue of a person
who has fallen from a height.
®
LUX-top ASP can be used in the following fall protection systems to EN 363:2008:
 Restraint systems
 Fall arrest systems
 Rescue systems
The respective user instructions of the other PFPE and abseiling (descent) and
rescue equipment used must also be noted and followed!
Depending on the fixing surface, overall height and bar diameter, the
suitable as an anchor point for load-bearing systems for rope-assisted access techniques
(descent work, etc.)! Additional requirements must be noted and fulfilled for this use case.
For example, redundant safety must always be ensured. For further information, please
ask the manufacturer.
®
The LUX-top ASP anchor device consists of the following components:

®
1 LUX-top ASP

User instructions

Installation Instructions
Anchor point material: Stainless steel W1.4301 / AISI 304
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
system is an anchor point in accordance with EN 795:2012 Type A +
anchor device is approved for simultaneous use by 3 people with full
anchor point complete with anchor eye and fixings
page 7 version 10/2014
®
LUX-top ASP is also