Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
®
Applicable to
LUX-top
mobilE
Please contact the manufacturer to request user instructions for older production batches!
LUX-top
STANDARDS
®
LUX-top
mobilE
795:2012 – Type E, and as a fixing point in LUX-top
795:2012 Type C.
SYMBOLS AND MARKINGS
A PPE notice must be attached and must contain the following information:
·
Type designation:
·
Number of the relevant standard:
·
Maximum allowable number of users:
·
Name or logo of the producer/seller:
·
Manufacturer's batch number and year of manufacture:
·
Symbol indicating that the user instructions must be noted and
followed:
·
CE marking with code of the notified body:
·
Note on use of an energy absorber
The product label is on the load distribution plate.
The legibility of this product labelling must be ensured at all times and must be
checked following installation and during the specified mandatory annual inspection!
ST Quadrat S.A.
Manufacturer:
11, rue Flaxweiler
L-6776 Grevenmacher/Potaschberg
Luxembourg
Notified body used for the type test:
TÜV Austria Services GmbH, Deutschstrasse 10, A - 1230 Wien / Austria, CE 0408
ST QUADRAT Fall Protection S.A. – your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
batch number 02-01/2018 and higher
®
mobilE
has been tested and certified as a single anchor point to EN
Example - Product labelling:
Page 11 valid from 02/18
®
FSE 2003 rope systems to EN
LUX-top
EN 795 : 2012 Type E
Version 02_2018
®
mobilE
( )
xx-xx/20xx
CE 0408
Publicité
Table des Matières
