ST Quadrat LUX-top mobilE Manuel De Montage Et D'utilisation page 23

®
Applicable to LUX-top mobilE
Please contact the manufacturer to request user instructions for older production batches!
Position bottom side pieces
opposite each other. Then place
upper side pieces on top of
them.
Fig. 6: Fixing the edging
Fig. 7: Completely installed edging
ST QUADRAT Fall Protection S.A. – your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
batch number 02-01/2018 and higher
13 mm
Fig. 8: Inserting the concrete pavement slabs
Page 9 valid from 02/18
Fig. 5: Pushing in the top side pieces
Use 4 cap nuts M8 and lock
washers to fix the edging on
the feet.
Lock washers must be in a
flat position after tightening
the nuts.
Version 02_2018