ST Quadrat LUX-top mobilE Manuel De Montage Et D'utilisation page 22

®
Applicable to LUX-top mobilE
Please contact the manufacturer to request user instructions for older production batches!
Assembly instructions
NOTE:
To protect the roof waterproofing
membrane, we recommend placing a
protective layer made of material identical
to the roofing membrane beneath the
®
LUX-top mobilE. The protective layer
must be friction locked (i.e. inseparably
joined) with the roof waterproofing
membrane.
Fig. 1: LUX-top
Arrangement of the feet on
the footplate of the LUX-
®
top ASP by means of
number sequence 1 – 4.
Fig. 3: Bolting the feet
Push the edging (consisting of
four side pieces) onto the
threaded bolts of the feet
according to their numbering.
ST QUADRAT Fall Protection S.A. – your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
batch number 02-01/2018 and higher
®
ASP
13 mm
Page 8 valid from 02/18
Start of the assembly with
LUX-top ® ASP anchor point
Fig. 2: Arrangement of the feet
Fixing of all four feet on the
®
LUX-top ASP by means of
bolts M8 x 10 and lock
washers.
Lock washers must be in a
flat position after tightening
the bolts.
Fig. 4: Mounting the side pieces
Version 02_2018