DeFelsko PosiTector CMM IS Mode D'emploi page 2

The PosiTector CMM IS concrete moisture meter measures the
relative humidity and temperature in concrete slabs using in situ
probes, prior to the application of flooring materials or coatings.
When applying flooring materials or coatings to concrete, it is critical
to ensure that the moisture level inside the concrete has decreased
to acceptable levels. If not, moisture can accumulate below the
flooring or coating, causing discoloration, cupping, buckling,
blistering, adhesive failure and mold growth.
Designed in accordance with ASTM F2170, the PosiTector CMM
IS provides a complete measurement solution for monitoring the
drying process of concrete slabs in compliance with industry
standards. The unique design of the PosiTector CMM IS probes
allow the user to place them into concrete immediately after the
holes are drilled and leave them in place until they reach
equilibrium, eliminating the need to reopen the hole at a later date.
PosiTector CMM IS probes broadcast measurements to the
PosiTector App (pg. 9) or PosiTector Advanced instruments
(pg. 11) using Bluetooth wireless technology.
The PosiTector CMM IS is available in 3 kit configurations:
Basic, Complete and Professional.
Basic Kit
CMMISKITB
— — —
3 CMM IS probes
3 Saturated Salt Solutions
3 Calibration Check
Chambers
3 Caps
6 Stackable Probe
Extensions
Extraction Tool
Tape Measure
Ten A-76/LR-44 batteries
Introduction
Complete Kit
CMMISKITC
— — —
5 CMM IS probes
5 Saturated Salt Solutions
5 Calibration Check
Chambers
5 Caps
10 Stackable Probe
Extensions
Extraction Tool
Tape Measure
Vacuum Tool Attachments
Ten A-76/LR-44 batteries
Hard shell carrying case
1
Professional Kit
CMMISKITP3 E
PosiTector DPM3
5 CMM IS probes
5 Saturated Salt Solutions
5 Calibration Check
Chambers
5 Caps
10 Stackable Probe
Extensions
Extraction Tool
Tape Measure
Vacuum Tool Attachments
Ten A-76/LR-44 batteries
Hard shell carrying case