Memory Management - DeFelsko PosiTector UTG Guide Rapide

Statistics
A statistical summary will appear on the display. Remove the last
measurement by pressing the(-)button.Press( + ) to clear statistics.
– Average
– Maximum Value
X
HiLo Alarm
Allows the Gage to visibly and audibly alert the user when
measurements exceed user-specified limits.
The PosiTector UTG has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-
screen or accessed via computers, tablets and smart phones. All
stored measurements are date and time-stamped. The
appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch"closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both the (-) and ( + ) buttons at any time to capture and save
an image copy of the current display. The last 10 screen captures
are stored in memory and can be accessed when connected to a
computer (see PosiSoft USB Drive, pg. 12).
Statistics Mode
X

Memory Management

store up to 250 readings in one batch.
store 100,000 readings in up to1,000
– Standard Deviation
– Minimum Value
11
symbol
Create a new batch
(Advanced only)
Restore brightness
after dimming