The revolution range to be select
ed is determined by the relevant
material and the intended task and
should be tested using a test piece.
CAUTION! Only switch over
when the motor is at a stand
still.
11 – After use
• Release the On/Off switch to
switch the machine off.
• Set the left/right rotation to the
middle position to block the On/Off
switch and prevent unintentional
activation of the machine.
• Remove the rechargeable battery
and the tool before you clean and
store the machine.
• Clean the machine as described
under "Cleaning and maintenance".
12 – Cleaning and
maintenance
Cleaning
CAUTION! Electric shock!
WARNING! Risk of electric
shock!
• Wait until the machine has
cooled down and remove the
76
MW-5450770-Bedien-1905.indd 76
rechargeable battery from the
machine.
• Before cleaning the charger,
always pull the plug out.
• Make sure that no water is able to
enter the machine.
• Do not damage the surfaces of
the machine.
• Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metal
lic cleaning tools such as knives,
hard spatulas or similar.
• Use a mild cleaning agent and a
dry or damp, but not dripping wet,
cloth. Do not use cleaning agents
that contain solvents!
• Always keep the ventilation slots
free from dust deposits in order
to prevent the machine from over
heating.
• Dry the machine and tools with a
soft cloth.
• We recommend cleaning the
machine after every use.
Maintenance
The machine does not contain any
parts that need to be maintained or
lubricated by the user.
08.05.19 14:32