Meister MAS12V Traduction Du Manuel D'utilisation Original page 65

5 Use and care of cordless tool
a When recharging a battery, only
use chargers that have been
recommended by the manu­
facturer. With a charger that is
designed for use with a particular
type of battery, there is a risk of
fire if it is used with other battery
types.
b Only use the rechargeable bat­
teries intended for the power
tools. The use of other batteries
may lead to injury and risk of fire.
c When not in use, keep the
rechargeable battery away from
paper clips, coins, keys, nails,
screws or other small metallic
objects that may bridge the
contacts. A short­circuit between
the rechargeable battery contacts
can lead to burns or fire.
d Fluid can escape from the bat­
tery when used incorrectly.
Avoid all contact with this. In
the event of accidental contact,
rinse with water. If liquid should
get into the eyes, get medical
assistance. Battery fluid may
result in skin irritations and burns.
e Do not use a damaged or modi­
fied battery. Damaged or modi­
fied batteries may behave unpre­
dictably and lead to fire, explosion
or personal injury.
f Do not expose a battery to fire
or high temperatures. Fire or
temperatures over 130 °C can
cause an explosion.
MW-5450770-Bedien-1905.indd 65
g Follow all charging instructions
and never charge the battery
or the cordless tool outside the
temperature range specified
in the operating instructions.
Incorrect charging or charging
outside the permitted temperature
range can destroy the battery and
increase the risk of fire.
6 Service
a Have your power tool serviced
by a qualified repair person
using only identical replace­
ment parts. This will ensure that
the safety of the power tool is
maintained.
b Never service damaged bat­
teries. All battery maintenance
should be performed by the manu­
facturer or by authorised service
centres only.
7 Special safety tips for drills
1) Safety precautions for all tasks
a Wear ear defenders when impact
drilling. The effects of noise may
lead to a loss of hearing.
b Use the additional handle(s).
Loss of control may lead to inju­
ries.
c Ensure that the power tool is
well supported before using.
This power tool generates high
torque. If the power tool is not
firmly supported when it is used,
this may lead to a loss of control
and to injuries.
65
08.05.19 14:32