is not designed to light living spac
es.
This machine is only designed for
private use.
Improper use of the product
All applications carried out with
the device that are not listed in the
„Proper use of the product" chapter
will be considered improper use.
Uses for which the tool is not
designed may cause risks and inju
ry. Do not use accessories that are
not intended specifically for this
electrical tool.
Tool inserts that do not fit precisely
to the sanding spindle of the electri
cal tool will rotate unevenly, vibrate
very heavily and may lead to a loss
of control.
There is a risk of injury. The user of
the device is liable for all property
and personal damages occurring as
the result of incorrect use.
If other components or nonorigi
nal components are used with the
machine, the manufacturer guarantee
is voided.
Remaining risks:
The operating instructions for
this electrical tool contains compre
hensive tips for the safe handling
of electrical tools. However, every
electrical tool has a certain level of
70
MW-5450770-Bedien-1905.indd 70
remaining risks which cannot be
excluded by the protective mecha
nisms on the device. Only operate
electrical tools always with neces
sary care.
Remaining risks may be, for
example:
• Touching rotating parts or tools.
• Injury caused by flying tools or
tool parts.
• Risk of fire with insufficient venti
lation of the motor.
• Adverse effects on the hearing
caused by working without ear
defenders.
The ability to work safely is depend
ant on the familiarity of the operator
when it comes to handling the given
electrical tool. Appropriate knowl
edge of the machinery and careful
behaviour when working help to
minimise the remaining risks.
WARNING! During operation,
this power tool generates
an electro magnetic field.
This field may, under certain cir
cumstances, influence active or
passive medical implants. In order
to reduce the risk of serious or
deadly injuries, we recommend per
sons with such a medical implant to
consult their doctor and the manu
facturer of the medical implant be
fore using the power
tool.
08.05.19 14:32