Meister MAS12V Traduction Du Manuel D'utilisation Original page 66

d Hold the power tool by the insu­
lated handle surfaces when car­
rying out tasks during which it is
possible that the tool will come
across hidden power cables
or its own connecting cable.
Contact with a live cable may also
cause metal tool parts to become
live with the risk of an electric
shock.
2) Safety precautions when using
long drills
a Never work with a speed higher
than the maximum permitted
speed for the drill. When using
with higher speeds, the drill may
bend easily if it is able to rotate
freely without contact with the
workpiece, and result in injuries.
b Always start the drilling process
with a low speed and with the
drill in contact with the work­
piece. When using with higher
speeds, the drill may bend easily
if it is able to rotate freely without
contact with the workpiece, and
result in injuries.
c Do not exert excess pressure
and only place pressure in a
longitudinal direction to the drill.
Drills may bend, and break, as a
result or lead to a loss of control
and to injuries.
8 Safety notes for rechargeable
battery/charger
a This device may be used by
children from the age of 8 and
66
also by persons with reduced
MW-5450770-Bedien-1905.indd 66
physical, sensory or mental
capabilities or lack of experi­
ence and/or knowledge, only
if they are supervised or have
been instructed regarding the
safe operation of the device and
understand the risks resulting
from this. Children may not play
with the device. Cleaning and
user maintenance tasks may
not be carried out by children
without supervision.
b Children may not play with the
charger. Cleaning and user
maintenance may not be carried
out by children unless they are
supervised.
c If the power cable of this charg­
er is damaged, it may only be
replaced by the manufacturer,
their customer service depart­
ment or a similarly qualified per­
son, in order to prevent risks.
d Do not use this charger to
charge batteries that are not
rechargeable.
e Place the battery charger and
battery on a well­ventilated sur­
face during charging.
f Separate the charger from the
power supply and allow to cool
down before cleaning, mainte­
nance and storage.
g Protect electrical parts from
damp. To prevent electric shock,
never submerge electrical parts
in water or other liquids while
cleaning or operating. Never hold
08.05.19 14:32