Troubleshooting And Assistance; Replacement Parts List - Meister MAS12V Traduction Du Manuel D'utilisation Original

Batteries and rechargeables
may not be disposed of in the
household waste!
As the consumer, you are legally
obliged to return all batteries and
rechargeable batteries whether
they contain hazardous materials*
or not, to a collection point in
15 – Troubleshooting and assistance
Faults
No functionality.
On/Off switch
cannot be pressed.
Machine does not start up.
Drill does not cut/hardly cuts
into the material to be drilled.
In the event of any other faults and errors, consult the customer service
department detailed in the guarantee documentation.
16 – Replacement parts list
The following parts may be pur­
chased by ordering from the cus­
tomer service department. They are
78
MW-5450770-Bedien-1905.indd 78
your communi­
ty/town/ store so that
they can be disposed of
in an environmentally
friendly way.
* Labelled with: Cd = Cadmium,
Hg = Mercury, Pb = Lead
Potential causes and remedies
– Rechargeable battery charged?
– Rotation direction switch set to cen­
tre position?
(Machine cannot be switched on).
­ The rotation direction switch
is in the centre position
– It is possible that the carbon
brushes are worn.
Consult a specialist workshop.
– Hammer drilling required?
– Correct drill bit selected?
– Is the machine accidentally set to
left rotation?
also available from your specialist
dealer.
Battery pack: MAS12VAP,
Art­Nr. 5450780
Li­Ion
08.05.19 14:32