Safety Requirements - Sabiana Ocean ECM Instructions Pour L'installation, L'utilisation Et La Maintenance

EN
and how to the clean, control and operate the ma-
chine; in addition, the manual provides important
informationabout maintenance, any residual risks
and however how to carry out operations to be per-
formed with special care.
This manual is to be considered a part of the machine
and must be preserved for future reference until
the machine is finally dismantled.
The manual is divided into the following sections.
– General information where important informa-
tion related to each phase of the life of the unit is
described (section dedicated to all recipients)
– Installation where all the steps to be followed by
the installer are described (installer section)
– Commissioning where all the phases for starting
the machine are described (installer section)
– Use where the operations that the user of the unit
can perform are described (user section)
– Maintenance where all the operations that must
be carried out for correct maintenance are descri-
bed (section dedicated to the maintenance tech-
nician)
– Recycling and disposal where all the operations
to be carried out at the end of the unit life are de-
scribed (section dedicated to the owner, installer
and maintenance technician)
The instruction manual must always stored in a pro-
tected and dry place.
The user can request a new manual from the manu-
facturer or from the local retailer if the manual is lost
or damaged. The request must include details of the
machine model and the serial number indicated on
the identifying data plate.
This manual reflects the technical features at the
date of preparation; the manufacturer reserves the
right to upgrade the production and the subsequent
manuals without being under an obligation to also
update previous versions.
The manufacturer will not be held liable in case of:
– improper or incorrect use of the unit;
– use that does not comply with the information
expressly specified in this publication;
– serious shortcomings in the foreseen and recom-
mended maintenance operations;
– changes made to the machine or any unauthori-
sed operation;
40
– using non-genuine spare parts or parts not speci-
fic to the model;
– total or partial failure to comply with the in-
structions;
– exceptional events.

Safety requirements

In the design and construction phases of the ma-
chine have been adopted special measures to avoid
risks for the operators in the typical situations of use
during the technical life of the appliance and espe-
cially in the following events:
• installation
• use
• maintenance of the unit.
Don't expose the appliance to flammable
gases
Make sure that the environment where the
unit is installed does not contain substances
that cause the corrosion of the aluminium
fins.
Please make sure that the earthing has been correct-
ly performed.
Provide, for the product protection, a RESIDUAL CUR-
RENT DEVICE (RCD) with a nominal residual operat-
ing current rating (Idn) not exceeding 30mA.
During the operation of the appliance the warm wa-
ter tubes (up to 95 °C) and the walls of the section of
the electric heating battery (if present) are exposed
to high temperatures. The operator should not touch
these parts.
If the unit needs maintenance, please switch it off
and wait some minutes. During maintenance please
always wear protection gloves.
Please don't introduce any objects or the hands into
the electric fan.
Interventions on the unit
Before any intervention on the unit please take the
following precautions:
• disconnect the electrical power supply.
• please use suitable protective clothing.
• don't approach the unit with cravats, scarfs or flut-
tering clothes, which could get trapped in the fan
section.
• assign the installation to qualified technical staff.