Contacter Le Service Client - Shure QLX-D Mode D'emploi

Code
Description
d'erreur
Err.006 No Frequencies Found
Err.007 Firmware Version Self-Test Failed
Shure SB900 battery runtime does
Err.008
not appear on display
Err.009 Transmitter Type Mismatch
Err.010 Battery Hot (Warning)
Err.011 Battery Hot Shutdown

Contacter le service client

Vous n'avez pas trouvé ce que vous recherchiez ?
Solutions
Rescan or use WWB to find a frequency.
Use the Shure Update Utility to update the unit to the latest firmware. If
the error persists, contact Shure Support.
Check that battery is firmly installed into the battery compartment. If
condition persists, replace the battery.
To complete the firmware update, match the type of transmitter to the
type of firmware the receiver currently has.
HH BP = handheld or bodypack firmware
BN GN = gooseneck or boundary firmware
Remove the transmitter from any possible external heat sources. Let
the device cool itself down. Consider swapping the battery to continue
operation.
All batteries should be stored and operated away from external heat
sources in reasonable temperature conditions for best performance.
If the condition persists, contact Shure support.
Let the device cool itself down and then consider swapping Swap the
battery to continue operation.
All batteries should be stored and operated away from external heat
sources in reasonable temperature conditions for best performance.
Identify any possible external heat sources to the transmitter and ope­
rate the transmitter away from those external heat sources.
If the condition persists, contact Shure support.
Contactez notre service client pour obtenir de l'aide.
Shure Incorporated
43/58