Grundfos CIM 500 Notice D'installation Et De Fonctionnement page 29

A.1.3. Login
For administration of username and password, see the section about user management in the appendix.
If you experience problems with logging in to the webserver after a firmware update, perform a
factory reset.
Login
Object Description
Enter username.
Username
Default: admin.
Enter password. Default: Grundfos.
After the first log in, you are forced to change the password.
The password must contain:
•
•
Password
•
•
When logging in, you have four attempts before a back-off algorithm starts an
exponentially increasing time delay between each attempt. Power cycling CIM 500 resets
the back-off algorithm.
at least 8 and maximum 20 characters
at least one lower case letter
at least one upper case letter
at least one numeric or special character.
281