Skandika X-3000 BLUETOOTH Instructions De Montage Et Mode D'emploi page 22

Assembly instructions
Step 4
Fix the handlebars (84) on the front tube of main frame (55) as shown with the screws
(87), washers (75), curved washers (90) and spring washers (88).
Connect sensor cable (39) and handpulse cable to the computer (86).
Pay attention not to squeeze any cables.
Fix the handles (78) on the rope (79). Attach the ropes (79) to the holders on the device
as shown.
CHECK ALL BOLTS AND NUTS ARE TIGHTENED BEFORE USING THE MACHINE!
The tension of the ropes
(79) can be adjusted by
57
placing the pin (57)
into a different position.
22