Computer Operating Instructions; Computer Functions - Skandika X-3000 BLUETOOTH Instructions De Montage Et Mode D'emploi

Computer Operating Instructions

Computer functions:

Function button
• Function selection: Press the button to select functions.
• Press and hold button for min. 6 seconds to reset time, distance or calories.
Function descriptions
• SCAN: Press function button until the small arrow "
play will show time, speed, distance, odometer, calories and pulse in sequence (each
value will be shown for approx. 6 seconds).
• TIME: Computer shows actual exercise time (max. 99:59 Min.).
• SPEED: The computer shows the current speed in the display (km/h).
• DISTANCE: The workout distance is displayed here (max. 99.99 km).
• ODO (ODOMETER): Computer will show the total accumulated distance here (max.
999.9 km).
• CALORIES: The currently burned calories are displayed here (max. 999.9 kcal).
• PULSE: The computer is showing the user's heart rate in beats per minute. For a cor-
rect display please ensure that you fully grasp the hand sensors. It may last up to 2
minutes before the pulse frequency will be measured correctly.
Remarks
• The small arrow "
housing), so that you can easily identify which value is currently displayed.
• The pulse value must not be regarded as a basis for any medical treatment.
• If the display quality gets poor, you should replace the batteries (2 x type "AAA").
Open the battery cover from the bottom housing to replace the batteries.
• AUTO ON/OFF: As soon as a movement starts or the button is pressed, the computer
will switch on. The computer does also switch off automatically, if there is no action
for approx. 4 minutes.
24
" always points to the respective function (on the computer
" points to "SCAN". The dis-