Skandika X-3000 BLUETOOTH Instructions De Montage Et Mode D'emploi page 21

Assembly instructions
Step 2
Attach the right pedal (12R) onto the right crank arm and tighten it by turning it iclock-
wise. Then attach the left pedal (12L) onto the left crank arm and tighten it by turning
it anti-clockwise. The pedals are marked with "R" (right) and "L" (left).
Attach the pedal straps to the pedals (12R & 12L).
Adjust the pedal straps to meet your foot/shoe size.
Step 3
Remove the pre-assembled nuts (51) and washers (50) from the underside of the seat
(68). Fix the seat (68) on top of the seat tube (67) with the nuts (51) and washers (50).
Insert the seat tube (67) into front tube of main frame (55), line up the holes and secu-
re the seat tube in position with the release nut (45). The seat height can be adjusted
according to your individual needs.
Fix backrest tube (70) on seat tube (67) with 2 bolts (69), 2 flat washers (50), 2 curved
washers (3) and 2 head nuts (4). Attach the backrest (77) with 4 washers (75) and 4 screws
(74).
21