Bottom Plate; Cleaning The Machine - Graef EURO 2200 Instructions D'utilisation

* Tip the end piece holder up.
* Press the snap holder of the end piece holder plate together.
* Pull off the end piece holder plate.
5.6

Bottom plate

The slicing machines have been fitted with a removable bottom plate, which
can be removed from the machine for cleaning by pulling it towards the
operator.
5.7

Cleaning the machine

Clean removable and non-removable parts according to the cleaning sched-
ule.
Warning !
Danger of injury ! Wear protective gloves !
Important !
Do not place the parts on top of each other. Risk of
damage.
Use a linen cloth to carefully clean the knife on the inside and outside.
The space between the knife and knife protection ring is cleaned best of all
as follows::
Take a single piece or several pieces (approx. 20 x 20 mm) of a beer mat,
depending on the wear of the knife. Moisturise this piece. Place this piece in
the space between the knife and the stop. Switch the machine on, and
permit the piece of beer mat to run through several times. Clean all surfaces
of the machine.
Warning !
Hold the tilted carriage when cleaning the carriage
profile. The carriage may drop back down.
38