Transport, Installation; Requirements On The Installation Site - Graef EURO 2200 Instructions D'utilisation

3

Transport, installation

3.1 Transport
The slicing machine weight approx. 18 to 23 kg. Use a suitable transport
unit for longer transport distances. Prior to transport set the cutting thick-
ness to below - 0 - by turning the adjusting knob to the stop.
Push the carriage right to the front and use amble scotch tape to immobi-
lise.
3.2

Requirements on the installation site

The support has to meet the following requirements:
## sufficient stability, steadiness, level, horizontal
## sufficient height permitting upright standing during the cutting
process
## space required according to the following list
## the dimensions listed are required for optimum utilisation
Model
EURO 2200/2210
EURO 2250
EURO 2500/2260
EURO 2560 S
EURO 3000
EURO 3060
## locate the machine in an area with little in-company movement
## do not place the machine in the vicinity of doors; in the swivelling
range of opening doors; in the access area of a door
Space required
at least 460x320 mm
at least 460x320 mm
at least 460x320 mm
at least 460x320 mm
at least 460x320 mm
at least 460x320 mm
32
Working area
at least 670x430 mm
at least 670x470 mm
at least 685x470 mm
at least 680x380 mm
at least 715x500 mm
at least 720x440 mm