Graef EURO 2200 Instructions D'utilisation page 37

Important !
The carriage can be tilted down only, if the adjusting
knob for the cutting thickness is turned clockwise to
stop.
5.3 Removing the spike plate (EURO 3000/3060 only)
Warning !
Danger of injury. The spikes of the plate have sharp
edges. Wear protective gloves.
* Unscrew the black knurled screw.
* Remove the honeycomb plate from the end piece holder plate.
5.4 Removing the knife covering plate (not for EURO 2250)
* Wear protective gloves with wrist protection.
* Tilt the end piece holder up.
* Place a suitable pen or screwdriver in the recess of the knife covering
plate.
* Unscrew the knife covering plate by turning clockwise.
5.5 Removing the end piece holder plate
Important !
For safety reasons the end piece holder plate may be
removed only when the carriage has been removed.
37
© Gebr.Graef Mai 2002
Technische Änderungen vorbehalten