Utility And Configuration Programmes - Corghi EYE LIGHT Manuel D'utilisation

- press the button
on the monitor to confirm the operation;
- Turn the wheel anticlockwise until you reach
the point where you want to apply the second
outer weight (P2) and align the laser point
with the second spoke.
- press the button
on the monitor to confirm the operation;
- When the procedure is completed, the unbal-
ance image is displayed on the screen includ-
ing two position indicators for the outer side.
The unbalance value displayed for this side
refers to the indicator in the centred position
condition.
Each of the two balancing weights is applied as
described in the "Balancing weight application"
section.
The Hidden weight function is combined with the
Shift planes function to allow balancing weights
which are multiples of 5 grams to be used.
You can quit the Hidden weight procedure at
any time by simply pressing the Exit button
.
The Hidden weight function can be disabled by
pressing the Hidden Weight.
UTILITY AND
CONFIGURATION
PROGRAMMES
The Utility programmes are all the functions of
the machine that are useful for its operation but
are not strictly connected to its normal operation.
To display the list of Utility programmes, select
the Utility and Configuration programmes icon.
The programmes in this sub-menu are now
available:
1.
SPIN COUNTER
64
or the button
or the button
2.
SET MANUAL WHEEL DIMENSIONS
3.
W H E E L D I A G N O S I S
4.
UNBALANCE OPTIMISATION PROGRAMME
5.
CONFIGURATION PROGRAMMES
1. SPIN COUNTER
Three counters are displayed on the screen:
-
the number of partial spins made since the
last manual reset;
-
the total number of spins performed by the
machine since its first start-up;
-
the number of wheel spins performed since
the last sensitivity calibration.
If the Weight Management suite is enabled, the
spin counter icon in the Utility programmes menu
becomes and displays:
-
the total number of spins performed by the
machine since its first start-up;
EYE LIGHT - Operator's manual
P R O G R A M M E