Safety Regulations; Warning - Caution - Corghi EYE LIGHT Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SAFETY REGULATIONS

WARNING
Non-compliance with the instructions and dan-
ger warnings can cause serious injuries to the
operator or other persons.
Do not operate the machine until you have read
and understood all the danger/warning notices
in this manual.
In order to operate the machine correctly, it is
necessary to be a qualified and authorised op-
erator, able to be trained and to know the safety
regulations. Operators are expressly forbidden
from using the machine under the influence of
alcohol or drugs capable of affecting physical and
mental capacity.
The following conditions are essential:
- Read and understand the information and in-
structions described in this manual.
- Have a thorough knowledge of the features and
characteristics of the machine.
- Keep unauthorised persons well clear of the
working area.
- Make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force.
- Make sure that all machine operators are suit-
ably trained, that they are capable of using the
machine correctly and safely and that they are
adequately supervised during work.
- Do not touch power lines or the inside of electric
motors or any other electrical equipment before
making sure that they have been powered off.
-Read this booklet carefully and learn how to use
the machine correctly and safely.
-Always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
EYE LIGHT - Operator's manual
WARNING
Do not remove or deface the DANGER,
WARNING,
CAUTION
decals. Replace any missing or illegible
decals. If one or more decals have been
detached or damaged, replacements can
be obtained from your nearest authorised
dealer.
- When using and carrying out maintenance on
the machine, observe the unified industrial ac-
cident prevention regulations for high voltage
industrial equipment and rotating machinery.
- Any unauthorised alterations made to the ma-
chine automatically release the manufacturer
from any liability in the case of damage or ac-
cidents as a result of such alterations. Specifi-
cally, tampering with or removing the machine's
safety devices is a breach of the regulations for
industrial accident prevention.
WARNING
During work and maintenance operations,
always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
Key to caution and instruction
labels
Never use the wheel spin shaft
as a lifting point for the machine.
Unplug the power supply plug
before performing any mainte-
nance/repair operations on the
machine.
Do not lift the guard when the
wheel is rotating.
or
INSTRUCTION
49
UK

Publicité

Table des Matières
loading

Table des Matières