Masimo LNOP MP Série Mode D'emploi page 4

Attaching the LNOP MP Patient Cable to the Masimo Sensor
1. Refer to Fig. 2. Orient the connecting tab of the sensor so that the «shiny» contacts are pointed up. Mate the logo on
the sensor to the logo on the patient cable.
2. Refer to Fig. 3. Insert the tab of the sensor into the patient cable connector until there is a tactile or audible click of
connection. Gently tug on the patient cable connector to ensure a positive contact. Tape may be used to secure the
cable to the patient for ease of movement.
Disconnecting the LNOP MP Patient Cable from the Masimo Sensor
1. Refer to Fig. 4. Place thumb and index finger on the buttons on either side of the patient cable connector.
2. Press firmly on the buttons and pull to remove the sensor.
SPECIFICATIONS
LNOP MP Patient Cables are for use with the following devices and sensors:
When used with Masimo SET® Technology:
Sensors
LNOP Adt/Adtx
LNOP Pdt/Pdtx
LNOP Inf-L
LNOP Neo-L
LNOP NeoPt-L
LNOP Trauma
LNOP Newborn
Neonatal
LNOP Newborn Infant/
Pediatric
LNOP Blue
LNOP DC-195
LNOP YI
LNOP TC-I
LNOP TF-I®
Body Weight
No Motion
> 30 kg 2%
10-50 kg 2%
3-20 kg 2%
< 3 kg 3%
> 40 kg 2%
< 1 kg 3%
> 30 kg 2%
< 3 kg 3%
3-10 kg
2%
10-30 kg
3%
(for 80–100)
4%
2.5–30 kg
(for 60–80)
3.3%
(for 70–100)
> 30 kg 2%
1-3 kg 3%
> 3 kg 2%
> 30 kg 3.5%
> 30 kg 2%
Saturation Accuracy
(70-100% SpO )
2
Low
Motion
Perfusion
3% 2%
3% 2%
3% 2%
3% 3%
3% 2%
3% 3%
3% N/A
3% 3%
3% 2%
N/A 3%
3% 2%
3% 3%
3% 2%
N/A 3.5%
N/A N/A
4
Pulse Rate Accuracy
(25-240 bpm)
No Motion Motion
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm N/A
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm 5 bpm
3 bpm N/A
3 bpm N/A
Low
Perfusion
3 bpm
3 bpm
3 bpm
3 bpm
3 bpm
3 bpm
N/A
3 bpm
3 bpm
3 bpm
3 bpm
3 bpm
3 bpm
3 bpm
N/A
LAB-4222H-eIFU