Maintaining And Cleaning Magicspeed - Waeco MagicSpeed MS800 Instructions De Montage Et De Service

_MS-800.book Seite 80 Donnerstag, 1. Juni 2006 8:22 08

Maintaining and cleaning MagicSpeed

Accelerating and decelerating
If the speed regulator is activated, you have the option of fine tuning it.
By doing this you can adapt the speed of the car precisely to suit traffic
conditions or speed limits.
➤ Touch the SET button to increase the speed by 1.5 km/h.
➤ Touch the RES button to decrease the speed by 1.5 km/h.
If, for example, you want to increase the speed by around 5 km/h, touch the
SET button three times.
Note
If you want to decrease the set speed sharply, do not use the
RES button.
Use the OFF button, the brake or the clutch and then press the
SET button to set the speed you want.
13 Maintaining and cleaning MagicSpeed
Caution
Do not use sharp or hard objects to clean the device as these may
damage the device.
➤ Clean the electronic module, the interface module and the control element
occasionally with a damp cloth.
80
MagicSpeed MS800