Proper Use; Technical Description; Function Description; Safety Features - Waeco MagicSpeed MS800 Instructions De Montage Et De Service

_MS-800.book Seite 54 Donnerstag, 1. Juni 2006 8:22 08

Proper use

4 Proper use
MagicSpeed is a speed regulator which maintains a constant set speed. It
compares the actual speed to the set speed and corrects it if necessary.
MagicSpeed is designed as an aid for driving; but it does not relieve you of
the duty to take proper care when driving.
MagicSpeed is designed for installation in cars.
5

Technical description

5.1

Function description

MagicSpeed consists of an electronic module and an interface module. The
electronic module is connected to a control element (accessory, e. g. a lever
or infrared remote control) by means of which you can make the required
settings. The control element is fitted in the dashboard area.
The electronic module measures the current speed and compares it to the
set speed. The interface module is connected to the accelerator pedal and
adjusts the engine power as required. The activation speed of the speed
regulator is about 40 km/h.
The system is equipped with various safety features for your protection.
5.2

Safety features

Caution
If your car has a steering wheel lock, make sure that it is not
activated when the key is in the ignition or a gear is selected.
The speed regulator has several safety features to switch it off if any of the
following situations arise:
You press hard on the accelerator pedal
You press the ON/OFF button on the control element
Engine overspeed
You brake to 50 % of the set speed
You accelerate to 150 % of the set speed
54
MagicSpeed MS800