Progress PAI8105E Notice D'utilisation page 21

Bridge function
The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the Bridge function touch
To set or change the heat setting touch one
of the control sensors.
To deactivate the Bridge function touch
The cooking zones operate independently.
When you use only one cooking zone of the
pair we recommend that you use the rear
cooking zone. Also when you use large
cookware we recommend that you put it
near to the rear cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
( comes on in the display).
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3
Power function
The Power function makes more power
available to the induction cooking zones.
comes on
4 5 6 7 8
The Power function can be activated for a
limited period of time ( see Technical Infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on. To deactivate, change the
.
heat setting.
Power management
.
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for one
cooking zone in the pair. The power in the
second cooking zone automatically decrea-
ses. The heat setting display for the re-
duced zone changes between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch or
00 99
( -
of the cooking zone starts to flash slow,
9
the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
vate the Timer. The remaining time
of the timer to set the time
minutes). When the indicator
and touch
progress 21
,
to deacti-