Festo AS-Interface ASI-EVA Manuel D'installation page 21

3.5 Connecting the valves (outputs)
Depending on design, the AS-Interface single valve con-
nector possesses 1 or 2 connecting cables for the outputs/
valves (type 2E1A-Z or ...-2E2A-Z).
Valve coils with a power consumption greater than 1 Watt
may only be operated with additional supply.
Variants Connection to valves
ASI-EVA ...
... MF-2E..A-Z All valves from Festo with F-coil, e.g.
ISO sizes 1 to 3, NAMUR, Tiger
Classic, Tiger 2000, start-up valve
type MFHE, Cassette Classic, direct-
controlled valves type MFH-...
... MEB-2E..A-Z CPE18-...-B, CPE24-...-B, ISO sizes 1
to 3, VDMA sizes 1 or 2, MIDI
... MZB9-2E..A-Z CPE10-...-B, CPE14-...-B, CPE10-SC
... K1-2E..A-Z Any outputs/valves, max. current con-
sumption see technical specifications.
Cable assignment:
Black 1/2 = 24 V / 0 V
green/yellow = n.c.
The AS-Interface has an integrated watchdog function
which resets the outputs in the event of failure of the bus
communication.
Festo ASI-EVA... 0105NH English
Length
0.5 m
0.5 m
0.5 m
1 m
21