Festo AS-Interface ASI-EVA Manuel D'installation page 15

1 Notes on use English
The AS-Interface single valve module type ASI-EVA... has
been designed for controlling pneumatic actuators and is
intended only for use in bus systems in accordance with
the AS-Interface specifications. In conjunction with addi-
tional commercially available components, such as sen-
sors and actuators, the specified limits for pressures, tem-
peratures, electrical data, torques etc. must be observed.
AS-Interface bus systems and single valve modules may
only be installed by technicians trained for this purpose.
Detailed specifications on designing and addressing your
bus system can be found in the manual for your AS-Inter-
face master.
Warning
S Switch off the power supply before connecting or
disconnecting plugs (to avoid functional damage).
Please note
Commission only a completely fitted and wired single
valve module.
Festo ASI-EVA... 0105NH English 15