Programming Menu; Installation Menu - entrematic Ditec Traffic C Manuel D'installation, D'entretien Et D'utilisation

6 PROGRAMMING MENU

6.1 INSTALLATION MENU

When the control panel is switched on, after showing the messages DITEC ENTREMATIC and microprocessor and card FW
VERSION, the device automatically enters the installation menu and displays the message SELECT LANGUAGE.
Confirm with
STEP 1 level options
st
1
Select language
Confirm with:
2
Door model
Confirm with:
3
Position control
Confirm with:
4
Calibrating positions
Confirm with:
5
Command mode
Confirm with:
6
CONFIRM DATA
PROGRAMMING COMPLETED
The door is now programmed and operating (with automatic closing and pulse command) with the set default speed values.
With the door MOVING, the voltage and current values will be displayed on the BUS.
0DT829 2016-04-01
2 level options
nd
ITA
ENG
FRA
TED
SPA
SRN300
SMART PLUS
SMART RESET
SECTOR PLUS
SECTOR RESET
TRAFFIC C
ALIMAX
LIMIT SWITCH
ENCODER
CLOSED POSITION
PARTIAL OPEN POS.
OPEN POSITION
IMPULSIVE
MAN PRESENT
Menu scrolling
- 42 -
Notes
Confirm with:
Confirm with:
Confirm with:
The door will move to the desired
position in man present mode and at
low speed.
Confirm position with:
Confirm with:
Confirm with: