Technical Specifications; Terms Of Guarantee - SuperFish UVC Master 75000 Mode D'emploi

Technical specifications

• TUV T5 lamp
• UVC output (W)
• UVC (%) after 4,500 hours
• Pond content (l)
• Max. flow
• Max. pressure
• Connection size
• Length of the device
Technical specifications of the dosing pump
• Power:
• Rotation:
• Voltage:
• Frequency:
UVC system types
UVC Master 75000 75.000 l / 75 Watt (230V; 50/60Hz)
Replacement lamps
Lamp 3903579 TUV 36 T5 HO 4P-SE 75 Watt
Replacement set for the dosing pump
replacement set for the dosing pump hoses (consisting of 2 dosing hoses, the suction
spout and the injection spout)
Replacement pump head
Dosing pump head
Available as an option:
Tapping saddle Ø 50mm 3/4" & PVC socket nipple (see Drawing 6, G+F)
Tapping saddle Ø 63mm 3/4" & PVC socket nipple (see Drawing 6, G+F)
6
75.000
75 Watt
25 Watt
85%
75.000 l
25.000 l/h
2 bar
Ø63 mm
100 cm
4 Watt
30 rpm
230V
50/60 Hz
IMPORTANT INFORMATION
First action before turning on the dosing pump (drawing 5).
If the pump head has been stopped for a longer period of time, there is a risk that it
will stick. In this case, you will hear a clicking sound. This can be prevented by activating
the silicones in advance by pulling the hose to and fro twice.
Default values
(start values as set in the factory)
• dP is set to 000 seconds for every hour.
• UV is set to Off for every hour.
Device
• Always ensure that the time is set.
• If the clock is not reset after a power cut, the device will not dose for safety reasons,
and the UV-lamp will not switch on.
Dosing pump
• Make sure that the hoses of the dosing pumps are filled with liquid, and that they
have no air in them.
• 1 sec = 0.5 cc
based on a viscosity (liquid thickness) equal to water
• Max. dosage time: 120 sec. per hour
General information
• The operating time of the lamp starts counting down on the time meter as soon as
the pump is switched on, even if the lamp is defect or if there is no lamp in the device.
• Ensure that you always carry out the dosing behind the UVC device. The water must
always pass through the UVC device first before the product is injected in the water.
• Always test the water manually

Terms of guarantee

You have made an excellent choice in selecting this product. The device has been
assembled carefully and in compliance with all applicable safety regulations. For
reasons of quality, the supplier has only made use of high-quality materials, and
provides a guarantee for the device covering material and manufacturing faults for a
period of 2 years from the date of purchase. The lamp and the quartz glass are not
included in this guarantee. Claims under the guarantee can only be considered if the
product is returned post-paid together with a valid purchase receipt. Repairs under the
guarantee may exclusively be carried out by the supplier.
Guarantee claims that are caused by errors in the installation or operation of the device
will not be considered. Defects originating from poor maintenance are also excluded
from the guarantee. The supplier will in no way whatsoever be held responsible for any
damage caused by the incorrect operation of the product. The supplier will not be liable
for any consequential damage caused by the breakdown of the device. Complaints
regarding transportation damage will only be considered if the damage was
established or confirmed on delivery by the carrier or the postal authorities. A claim
can only be made against the carrier or the postal authorities if this has been done.